Website updates are happening live. You may experience temporary navigation issues.

Please contact us for lead times.

See how the ATPRO Power Points program works.

Website updates are happening live. You may experience temporary navigation issues.

Please contact us for lead times.

See how the ATPRO Power Points program works.

Search

1/4" Male "MEG" Nozzle 4000psi (0° 15° 25° 40°)

BE-85.200.020

Threaded pressure washer spray tip. Hardened stainless-steel nozzle ensures consistent, accurate orifice size

  • 1/4" MPT thread
  • 4000 Rated PSI

Spray angles are optional.

Popular orifice sizes are:

  • #02.0 x 2 for most Flat Surface Cleaners (25° Ideal)
  • #03.5 x 1 for 3.5 to 4.0 gpm @ 3500 to 4200psi (13 to 15hp Gas)
  • #04.0 x 1 for 4.0 gpm @ 4000psi (13hp Gas)
  • #04.5 x 1 for 4.0 gpm @ 3000psi (11hp Gas)
  • #05.0 x 1 for 3.5 gpm @ 2000psi
  • #05.5 x 1 for 5.0 gpm @ 3500psi
  • #06.0 x 1 or #03.0 x 2 for 5.6 gpm @ 3500psi
  • #09.0 x 1 or #04.5 x 2 for 8 gpm @ 3000psi

Product may differ in appearance from the picture.

PLEASE NOTE NPT thread does not match the measurement on a tape. Please use the chart below or contact us if you are unsure what size you need.

    Important - Use this nozzle selection guide and choose your orifice size based on the flow (gpm) and pressure (psi) of your washer.

    A nozzle with an orifice that is too large will reduce operating pressure. A nozzle with an orifice that is too small will limit water flow and possibly create an excessive load on the machine.

    Search