General Pump - Interpump


GP2124 Unloader Valve 21gpm 4000psi

Unloader Valve - Trapped Pressure

Pressure Trap unloaders sense the building of pressure when the trigger is closed and go into bypass mode. These unloaders are reliable and are not sensitive to the nozzle orifice size but the trapped pressure, called the spike pressure, makes the hose stiff during bypass and causes a kick-back when the trigger is pulled.

Rated Flow: 21gpm

Rated Temperature 200°F

Rated PSI: 4000psi

Inlet: 1/2" FPT

Outlet: 1/2" FPT

Bypass: 1/2" FPT

**NOTE on Unloaders**

Unloader valves are one of the most important safety devices on a pressure washer system. It is recommended that an experienced mechanic installs the unloader and sets the operating and spike pressure properly with a pressure gauge. Failure to install and set the unloader properly could result in a very dangerous situation causing severe damage to the pump and possibly the operator.