Suttner Milling Non-Rotating Sewer and Drain Nozzles 3/4 Inch Thread 5076psi

Suttner Non-Rotating "Milling" Sewer and Drain Nozzle 3/4 Inch thread.

Ports have precisely drilled inserts.

3/4" Milling models include six rear jets and three or four front jets for cutting through the toughest blockages including "milling" through roots.

Applications:

Ideal for 12" to 20" lines.

Features:

• Hardened stainless steel - wear resistant.
• Outside diameter: 1.5".
  
• 6 rear Jets - configurable with insert.
• 3 or 4 x Front Jets
• Sharp cutting edges and forward tearing jets cut through solid plugs.
• Works well for lines with roots.

Nozzle Orifice: Optional

Use the nozzle chart ad selection guide to match the flow rate (gpm) and pressure with your pump. Choose the closest match nozzle orifice based on your specs.

A nozzle with an orifice that is too large will reduce operating pressure. A nozzle with an orifice that is too small will limit water flow and possibly create an excessive load on the machine and reduce performance.

Pro Tip** - For sewer jetting it is best to size the nozzle to allow the most flow possible so it's okay to choose a size larger than you would for pressure washer.

Best suited for use with sewer jetting hose.