HM Unloader Valve 1.3gpm to 10.83gpm 3000psi
Unloader Valve - Trapped Pressure
Pressure Trap unloaders sense the building of pressure when the trigger is closed and go into bypass mode. These unloaders are reliable and are not sensitive to the nozzle orifice size but the trapped pressure, called the spike pressure, makes the hose stiff during bypass and causes a kick-back when the trigger is pulled.
Rated Flow Range: 1.3 to 10.83gpm
Rated Temperature 165°F
Rated PSI: 1900psi
Inlet: 3/8" FPT
Outlet: 3/8" MPT + (1/4" accessory/gauge port)
Bypass: Dual 3/8" FPT
**NOTE on Unloaders**
Unloader valves are one of the most important safety devices on a pressure washer system. It is recommended that an experienced mechanic installs the unloader and sets the operating and spike pressure properly with a pressure gauge. Failure to install and set the unloader properly could result in a very dangerous situation causing severe damage to the pump and possibly the operator.