Suttner Ball Type Non-Rotating Sewer and Drain Nozzles 1/4 Inch Thread 4200psi
Suttner Non-Rotating "Ball Type" Sewer and Drain Nozzle 1/4 Inch Thread.
Models available include the following options:
Three or more rear jet for propulsion and one forward jet to break up clogs.
Three or more rear jets and zero forward for maximum penetration and propulsion.
Ideal for 2” - 4" diameter lines. Suitable for 1-1/2" or up to 6" pipe.
Hardened stainless steel
Compact design ideal for maneuvering through tight elbows.
Outside diameter: 0.75"
3 or more x Rear Jets
*Optional 1 x Front Jet
Nozzle Orifice: Optional
Use the nozzle chart ad selection guide to match the flow rate (gpm) and pressure with your pump. Choose the closest match nozzle orifice based on your specs.
A nozzle with an orifice that is too large will reduce operating pressure. A nozzle with an orifice that is too small will limit water flow and possibly create an excessive load on the machine and reduce performance.
Pro Tip** - For sewer jetting it is best to size the nozzle to allow the most flow possible so it's okay to choose a size larger than you would for pressure washer.
Best suited for use with sewer jetting hose.
Knowledgeable Sales Team
Full Service Center - Metro Vancouver Area
Support Staff Available
Fast efficient shipping
Custom Builds and Installations